Subaru Legacy 2005 Service Manual page 2756

MANUAL TRANSMISSION AND DIFFERENTIAL
6) Install the reverse idler gear No. 2.
7) Install the shifting insert key in proper place of
reverse sleeve.
NOTE:
Angle of each shifting insert key is 120°.
(A)
(A) Reverse sleeve
(B) Shifting insert key
Reverse Idler Gear
MT-00632
(B)
(A)
(B)
MT-00633
8) Install the reverse sleeve to reverse idler gear
No. 2.
NOTE:
Be sure the reverse sleeve is installed in proper di-
rection.
9) Apply sufficient amount of gear oil to the collar,
needle bearing and inner periphery of reverse drive
gear.
10) Install the outer baulk ring, reverse synchro
cone and inner baulk ring.
(A)
(A) Outer baulk ring
(B) Reverse synchro cone
(C) Inner baulk ring
11) Install the collar and needle bearing, then in-
stall the knock pin.
(A) Collar
(B) Needle bearing
(C) Knock pin
6MT-94
MT-00634
(B)
(C)
MT-00635
(C)
(B)
(A)
MT-00636