Subaru Legacy 2005 Service Manual page 2611

11.Transfer Driven Gear
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 5MT-30, REMOVAL, Manual
Transmission Assembly.>
2) Remove the back-up light switch and neutral po-
sition switch. <Ref. to 5MT-40, REMOVAL, Switch-
es and Harness.>
3) Remove the transfer case with extension case
assembly. <Ref. to 5MT-43, REMOVAL, Transfer
Case and Extension Case Assembly.>
4) Remove the extension case assembly.
5) Remove the transfer driven gear.
6) Remove the bearing outer races from the exten-
sion case and transfer case.
(A) Bearing outer race (Transfer case side)
(B) Bearing outer race (Extension case side)
Transfer Driven Gear
MT-00118
(A)
(B)
MT-00140
5MT-49
MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Install the bearing outer races to the extension
case and transfer case.
(C)
(A) Bearing outer race
(B) Bearing outer race
(C) Transfer case
(D) Extension case
2) Install the transfer driven gear.
3) Install the transfer case and extension case as-
sembly. <Ref. to 5MT-43, INSTALLATION, Trans-
fer Case and Extension Case Assembly.>
4) Install the back-up light switch and neutral posi-
tion switch. <Ref. to 5MT-40, INSTALLATION,
Switches and Harness.>
5) Install the manual transmission assembly into
vehicle. <Ref. to 5MT-32, INSTALLATION, Manual
Transmission Assembly.>
(A)
(D)
(B)
MT-00141
MT-00118