Table of Contents
Advertisement
6) Install the reverse shifter fork assembly to re-
verse idler gear assembly.
(C)
(A) Reverse idler gear ASSY
(B) Reverse shifter fork
(C) Reverse sleeve
7) Install the reverse idler gear assembly.
(B)
(A) Reverse idler gear ASSY
(B) 1st drive gear
(C) Reverse gear
8) Install the thrust bearing of driven gear assem-
bly.
9) Push each shifter fork, main shaft assembly,
driven gear assembly and reverse idler gear as-
sembly to install them to adapter plate at a time.
NOTE:
A helper is required to perform this work.
10) Install the plunger, checking ball spring, new
gasket and checking ball plug.
Main Shaft Assembly
(B)
(A)
MT-00551
(A)
(C)
MT-00552
MANUAL TRANSMISSION AND DIFFERENTIAL
Tightening torque:
⋅
37 N
m (3.8 kgf-m, 27.3 ft-lb)
(A)
(B)
(A) Checking ball plug
(B) Gasket
(C) Checking ball spring
(D) Plunger
6MT-71
(C)
(D)
MT-00553
Advertisement
Chapters
Table of Contents
