Subaru Legacy 2005 Service Manual page 2732

MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Adjust the 3rd-4th and 5th-6th shifter fork rod.
<Ref. to 6MT-115, ADJUSTMENT, Shifter Fork
and Rod.>
2) Rotate the sub gear counterclockwise for ap-
prox. three teeth. Insert the ST aligning sub gear
and reverse idler gear hole.
ST 18757AA000 STRAIGHT PIN REMOVER
ST
(B)
(A) Sub gear
(B) Reverse idler gear
3) Install the driven gear assembly to 1st-2nd
shifter fork assembly.
(B)
(A) 1st-2nd shifter fork
(B) Driven gear ASSY
(C) 1st-2nd sleeve
Main Shaft Assembly
(A)
MT-00547
(C)
(A)
MT-00548
4) Install the main shaft assembly to 3rd-4th shifter
fork and assemble them to driven gear assembly.
(D)
(A) 3rd-4th shifter fork
(B) 3rd-4th sleeve
(C) Driven gear ASSY
(D) Main shaft ASSY
5) Install the 5th-6th shifter fork assembly to main
shaft assembly.
(C)
(A)
(A) 5th-6th shifter fork
(B) 5th-6th sleeve
(C) Main shaft ASSY
6MT-70
(A)
(B)
(C)
(A)
(B)
(D)
(C)
MT-00549
(B)
MT-00550