Subaru Legacy 2005 Service Manual page 2608

MANUAL TRANSMISSION AND DIFFERENTIAL
2. EXTENSION CASE
1) Remove the transfer drive gear assembly. <Ref.
to 5MT-47, REMOVAL, Transfer Drive Gear.>
2) Remove the shift bracket.
3) Remove the oil seal from extension case. <Ref.
to 5MT-38, Oil Seal.>
D: ASSEMBLY
1. EXTENSION CASE
1) Using the ST, install the oil seal to extension
case. <Ref. to 5MT-38, Oil Seal.>
NOTE:
Use a new oil seal.
2) Install the shift bracket to extension case.
Tightening torque:
⋅
25 N m (2.5 kgf-m, 18.4 ft-lb)
3) Install the transfer drive gear to extension case.
<Ref. to 5MT-47, INSTALLATION, Transfer Drive
Gear.>
Transfer Case and Extension Case Assembly
MT-00130
MT-00130
2. TRANSFER CASE
1) Install the oil guide to transfer case.
Tightening torque:
⋅
6.4 N m (0.65 kgf-m, 4.7 ft-lb)
2) Install the reverse check sleeve assembly to
transfer case. <Ref. to 5MT-52, INSTALLATION,
Reverse Check Sleeve.>
5MT-46
MT-00129