Subaru Legacy 2005 Service Manual page 2750

MANUAL TRANSMISSION AND DIFFERENTIAL
18) Using the ST, install the 3rd-4th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
• Be sure the 3rd-4th driven gear is installed in
proper direction.
• Align the groove of 3rd-4th driven gear with key.
ST
(B)
(A) 4th gear
(B) 3rd gear
(C) 2nd gear
19) Make sure the 2nd driven gear is smoothly
turned by hand. If it is not rotated smoothly, reas-
semble it.
20) Install the key.
Driven Gear Assembly
21) Using the ST, install the 5th-6th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
• Be sure the 5th-6th driven gear is installed in
proper direction.
• Align the groove of 5th-6th driven gear with key.
(A)
(C)
MT-00609
22) Using the ST, install the ball bearing.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
Be sure the ball bearing is installed in proper direc-
tion.
MT-00610
23) Make sure the ball bearing is smoothly turned
by hand. If it is not rotated smoothly, reassemble it.
24) Install a new lock nut.
6MT-88
ST
(B)
(A) 6th gear
(B) 5th gear
(C) 4th gear
ST
(A)
(C)
MT-00611
MT-00612