Subaru Legacy 2005 Service Manual page 2645

Hide thumbs Also See for Legacy 2005:

Table of Contents

Starting torque:

m (0.03 — 0.08 kgf-m, 0.2 — 0.6 ft-

4) If the starting torque is not within specified limit,

select new adjusting washer No. 1 and recheck

starting torque.

(A) Adjusting washer No. 1

(B) Adjusting washer No. 2

Adjusting washer No. 1

Drive Pinion Shaft Assembly

Thickness mm (in)

3.925 (0.1545)

3.950 (0.1555)

3.975 (0.1565)

4.000 (0.1575)

4.025 (0.1585)

4.050 (0.1594)

4.075 (0.1604)

MANUAL TRANSMISSION AND DIFFERENTIAL

5) When the specified starting torque cannot be ob-

tained by the adjusting washer No. 1, select the ad-

justing washer No. 2 from following table. Repeat

steps 1) through 4) to adjust starting torque.

(A) Adjusting washer No. 1

(B) Adjusting washer No. 2

Starting torque

Adjusting washer No. 2

6) Recheck that the starting torque is within speci-

fied range, then clinch the lock nut at four positions.

Washer No. 2

Select thicker one.

Select thinner one.

Thickness mm (in)

3.850 (0.1516)

4.000 (0.1575)

4.150 (0.1634)

Chapters

Table of Contents