Subaru Legacy 2005 Service Manual page 2141

Corrective action: Increase thickness of drive pin-
ion height adjusting shim in order to bring drive pin-
ion close to hypoid driven gear.
• Flank contact
Checking item: Backlash is too small.
Contact pattern
Corrective action: Reduce thickness of drive pinion
height adjusting shim in order to bring drive pinion
away from hypoid driven gear.
• Toe contact (inside end contact)
Checking item: Contact area is too small.
Contact pattern
Drive Pinion Shaft Assembly
Corrective action: Reduce thickness of drive pinion
height adjusting shim in order to bring drive pinion
away from hypoid driven gear.
AT-00212
• Heel contact (outside end contact)
Checking item: Contact area is too small.
Contact pattern
AT-00209
Corrective action: Increase thickness of drive pin-
ion height adjusting shim in order to bring drive pin-
ion close to hypoid driven gear.
AT-00213
AT-00210
4AT-113
AUTOMATIC TRANSMISSION
AT-00213
AT-00211
AT-00212