Table of Contents
Advertisement
8) Move the transmission to the right side, then in-
stall the stay.
Tightening torque:
⋅
T: 32 N
m (3.3 kgf-m, 23.6 ft-lb)
(A)
T
(A) Stay
9) Install the crossmember. <Ref. to 6MT-32, IN-
STALLATION, Transmission Mounting System.>
10) Install the rear exhaust pipe and muffler. <Ref.
to EX(H6DO)-7, INSTALLATION, Rear Exhaust
Pipe.> <Ref. to EX(H6DO)-9, INSTALLATION,
Muffler.>
11) Install the reverse check cable, washer and
snap pin to reverse check lever.
NOTE:
Take care to install the snap pin in proper direction.
(D)
(B)
(A) Reverse check cable
(B) Washer
(C) Snap pin
(D) Front side
12) Install the under cover.
Reverse Check Cable
CS-00246
(C)
(A)
CS-00224
CS-55
CONTROL SYSTEMS
Advertisement
Chapters
Table of Contents
