MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Insert the reverse lock plunger.
2) Install in the order of reverse checking plug,
spring, gasket and plug.
Tightening torque:
⋅
41 N
m (4.2 kgf-m, 30.2 ft-lb)
(A) Plug
(B) Gasket
(C) Spring
(D) Reverse checking plug
Reverse Check System
(D)
(C)
(B)
(A)
MT-00497
6MT-54
3) Install the spring and reverse check shaft to ex-
tension case.
NOTE:
Be sure the spring end aligns with the hole of re-
verse check shaft and the cutout portion of exten-
sion case.
(B)
(A)
(C)
(A) Reverse check shaft
(B) Spring
(C) Hole
(D) Cutout portion
4) Install the washer and snap ring.
(A) Snap ring
(B) Washer
(B)
(A)
(D)
MT-00499
(B)
(A)
MT-00494