Subaru Legacy 2005 Service Manual page 2114

AUTOMATIC TRANSMISSION
5) Insert the multi-plate clutch, drive plate, driven
plate and spring retainer.
(A) Spring retainer
(B) Multi-plate clutch (LSD) piston assembly
6) Install the snap ring using ST1, ST2 and ST3.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
ST3 398663600 PLIERS
ST3
E: INSPECTION
• Spray compressed air, and make sure the trans-
fer pipe and extension case routes are not clogged
and have no leak.
• Inspect the extension end play, and adjust it to
within specification.
MP-T model
<Ref. to 4AT-90, MP-T MODEL, ADJUST-
MENT, Transfer Clutch.>
VTD model
<Ref. to 4AT-91, VTD MODEL, ADJUSTMENT,
Transfer Clutch.>
Extension Case
(A)
(B)
AT-00126
ST1
ST2
AT-00121
4AT-86