Table of Contents
Advertisement
4. Front Stabilizer
A: REMOVAL
1) Lift-up the vehicle, and then remove the front
wheels.
2) Remove the front under cover. <Ref. to EI-26,
REMOVAL, Front Under Cover.>
3) Remove the front crossmember support plate.
<Ref. to FS-14, REMOVAL, Front Crossmember
Support Plate.>
4) Remove the stabilizer link.
5) Remove the stabilizer bracket.
Front Stabilizer
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Use a new self-locking nut.
• Ensure the stabilizer bushing and stabilizer have
the same identification colors.
• Install the stabilizer bushing (front crossmember
side) while aligning it with the paint mark on stabi-
lizer.
• Stabilizer bracket has an orientation, so install it
with the arrow mark faced to the front side of vehi-
cle.
FS-00117
Tightening torque:
Stabilizer link
45 N
Stabilizer bracket
25 N
C: INSPECTION
1) Check the bushing for crack, fatigue or damage.
FS-00114
2) Check the stabilizer link for damage.
FS-15
FRONT SUSPENSION
(1) Front side of vehicle
⋅
m (4.6 kgf-m, 33.2 ft-lb)
⋅
m (2.5 kgf-m, 18.4 ft-lb)
(1)
FS-00116
Advertisement
Chapters
Table of Contents
