Ford Transit 2002 Owner's Manual page 1153

Electronic Engine Controls - Powertrain
Control Module (PCM)—1.8L Duratorq-
TDDi (55kW/75PS) - Lynx/1.8L Duratec-
DOHC (85kW/115PS) - Zetec, LHD FWD,
Vehicles Built Up To: 07/2006
Removal and Installation
NOTE: If a new PCM is being installed connect WDS. Upload the PCM configuration
information using the programmable modules installation routine prior to commencing the
removal of the PCM.
2. Remove the components in the order indicated in the following illustration(s) and table
(s).
Item Part Number
1 -
2 -
3 -
4 -
1. Disconnect the battery ground cable. For
additional information, refer to Section
Battery, Mounting and
Description
Glovebox retaining bolts
Glovebox
Passenger side instrument panel lower footwell trim panel retaining
clips
Passenger side instrument panel lower footwell trim panel
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Cables.
Print
414-01