Address Recognition Options; Internal Loopback - Motorola ColdFire MCF5281 User Manual

Motorola microcontroller user's manual
Table of Contents

Advertisement

Modes of Operation
17.2.2.2 10 Mpbs 7-Wire Interface Operation
The FEC supports a 7-wire interface as used by many 10 Mbps ethernet transceivers. The
RCR[MII_MODE] bit controls this functionality. If this bit is deasserted, the MII mode is
disabled and the 10 Mbps, 7-wire mode is enabled.

17.2.3 Address Recognition Options

The address options supported are promiscuous, broadcast reject, individual address (hash
or exact match), and multicast hash match. Address recognition options are discussed in
detail in Section 17.4.8, "Ethernet Address Recognition".

17.2.4 Internal Loopback

Internal loopback mode is selected via RCR[LOOP]. Loopback mode is discussed in detail
in Section 17.4.13, "Internal and External Loopback".
MOTOROLA
Chapter 17. Fast Ethernet Controller (FEC)
17-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Coldfire mcf5282

Table of Contents