Table of Contents
Advertisement
Programming Model
17.5.4.20 FIFO Receive Start Register (FRSR)
The FRSR is an 8-bit register programmed by the user to indicate the starting address of the
receive FIFO. FRSR marks the boundary between the transmit and receive FIFOs. The
transmit FIFO uses addresses from the start of the FIFO to the location four bytes before
the address programmed into the FRSR. The receive FIFO uses addresses from FRSR to
FRBR inclusive.
The FRSR register is initialized by hardware at reset. FRSR only needs to be written to
change the default value.
31
Field
Reset
R/W
15
Field
Reset
R/W
Address
Figure 17-23. FIFO Receive Start Register (FRSR)
Bits
31–10
9–2
1–0
17.5.4.21 Receive Descriptor Ring Start (ERDSR)
The ERDSR is written by the user. It provides a pointer to the start of the circular receive
buffer descriptor queue in external memory. This pointer must be 32-bit aligned; however,
it is recommended it be made 128-bit aligned (evenly divisible by 16).
This register is not reset and must be initialized by the user prior to operation.
17-42
0000_0000_0000_0000
10
9
—
0000_0101_0000_0000
IPSBAR + 0x1150
Table 17-32. FRSR Field Descriptions
Name
—
Reserved, read as 0 (except bit 10, which is read as 1).
R_FSTART
Address of first receive FIFO location. Acts as delimiter
between receive and transmit FIFOs.
—
Reserved, read as 0.
MCF5282 User's Manual
—
R
R_FSTART
R
Descriptions
16
2
1
0
—
MOTOROLA
Advertisement
Table of Contents
