Brocade Communications Systems StoreFabric SN6500B User Manual page 1118

A
SAN main menus
Menu Command
Port Optics (SFP) — Select to display the properties
associated with a selected small form-factor pluggable
(SFP) transceiver on the selected device.
SNMP Setup — Select to configure SNMP traps.
Syslog Configuration — Select to configure Syslog for the
Management server.
Technical Support — Select to configure technical support
data.
Troubleshooting — Select to troubleshoot your SAN.
1070
Command Options
Trap Forwarding — Select to configure trap forwarding.
Product Trap Recipients — Select to register a host as a
trap recipient.
Event Reception — Select to configure the server to
accept or drop traps and specify SNMP credentials and
community strings, which are required to decode traps on
receiving them.
Informs — Select to enable or disable SNMP informs on
the device.
Syslog Forwarding — Select to configure Syslog
forwarding.
Product Syslog Recipients — Select to register a host as a
syslog recipient.
SupportSave — Select to capture server and client
support data.
Product/Host SupportSave. (Fabric OS devices only)
Select to configure technical support data collection.
Upload Failure Data Capture — Select to configure
capture failure data for Fabric OS devices.
View Repository — Select to view repository data.
FC — Select how to troubleshoot FC by choosing one of
the following options:
•
FC Trace Route — Select to view the route
information between two device ports.
•
Device Connectivity — Select to view the connectivity
information for two devices.
•
Fabric Device Sharing. (Trial and Licensed version
Only) Select to determine if the selected fabrics are
configured to share devices.
•
Diagnostic Port Test — Select to run a diagnostic port
test.
Brocade Network Advisor SAN User Manual
53-1002696-01