San Shortcut Menus - Brocade Communications Systems StoreFabric SN6500B User Manual

Menu Command
Reports Menu
Event Custom Reports — Select to generate custom event
reports.
Generate — Select to determine which reports to run.
View — Select to view reports through the application or
through an internet browser.
Tools Menu
Setup. (Trial and Licensed version Only) Select to set up
the applications that display on the Tools menu.
Product Menu — Select to access the tools available on a
device's shortcut menu.
Plug-in for SCOM — Select to configure a SCOM server.
Tools List (determined by user settings) — Select to open
a software application. You can configure the Tools menu
to display different software applications. Recommended
tools to include in this menu include an internet browser,
the command prompt application, and Notepad.
Help Menu
Contents — Select to open the Online Help.
Find — Select to search the Online Help.
License — Select to view or change your License
information.
About Management_Application_Name — Select to view
the application information, such as the company
information and release number.

SAN shortcut menus

You can use the Management application interface main menu to configure, monitor, and
troubleshoot your SAN components. The instructions for using these features are documented in
the subsequent chapters of this manual.
Brocade Network Advisor SAN User Manual
53-1002696-01
SAN shortcut menus
Command Options
FCIP — Select how to troubleshoot FCIP by choosing one
of the following options:
•
Ping — Select to perform a zoning check between the
selected device port WWNs.
•
Trace Route. (Trial and Licensed version Only) Select
to view the route information from a source port on
the local device to a destination port on another
device.
•
Performance. (Trial and Licensed version Only)
Select to view IP performance between two devices.
A
1071