Setting Refresh Frequency For Internet Explorer - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Brocade supports the platforms shown in
TABLE 4
Operating System
Red Hat AS 4.0 (x86 32-bit)
RedHat Enterprise Linux 6.1 Adv (32-bit)
SUSE Linux Enterprise Server 10 (32-bit)
SUSE Linux Enterprise Server 11 (x86 32-bit)
Windows 2000
Windows 2003 Server, SP2
Windows XP Pro SP3 (x86 32-bit)
Windows Server 2003 Standard SP2 (x86
32-bit)
Windows Server 2008 Standard
Windows 7 Service Pack 1 (SP1)
Solaris 9 (SPARC only)
Solaris 10 (SPARC only)
Oracle Enterprise Linux 6.1 (x86 32-bit)
For Windows systems, a minimum of 256 MB of RAM for fabrics comprising up to 15 switches, 512
MB of RAM for fabrics comprising more than 15 switches, and a minimum of 8 MB of video RAM
are recommended. Additionally, a DCX with a fully populated FC8-64 blade requires a minimum of
512 MB of RAM.

Setting refresh frequency for Internet Explorer

Correct operation of Web Tools with Internet Explorer requires specifying the appropriate settings
for browser refresh frequency and process model. Browser pages should be refreshed frequently to
ensure the correct operation of Web Tools.
To set the Internet Explorer options, perform the following steps.
1. Open your web browser and select Tools > Internet Options.
2. Select General > Browsing History > Settings.
3. Choose Every time I visit the webpage under "Check for newer versions of stored pages:" as
Web Tools Administrator's Guide
53-1002756-01
Supported platforms
shown in Figure 1 on page 6.
System requirements
Table 4.
Browser
Firefox 12.0
Firefox 12.0, Internet Explorer 9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0
Firefox 12.0
1
5