Setting Fabric Watch Custom And Default Values; E-Mail Notification Configuration; Showing E-Mail Configuration Information - Brocade Communications Systems SN3000B Administrator's Manual

Setting Fabric Watch custom and default values

Use the following commands to switch between custom and default values. These commands reset
all thresholds for all classes:
•
•

E-mail notification configuration

In environments where it is critical that you are notified about errors quickly, you can use e-mail
notifications. With e-mail notifications, you can be notified of serious errors by e-mail or a pager, so
you can react quickly.
To configure e-mail notifications in a Telnet session, perform the following steps.
1. Enter the fwMailCfg command at the prompt.
2. Enter the number corresponding to the task you wish to perform.

Showing e-mail configuration information

1. Enter 1 in the fwMailCfg menu to view the current e-mail configuration classes.
Fabric Watch Administrator's Guide
53-1002153-02
fwSetToCustom - Sets the boundary and alarm level to custom.
fwSetToDefault - Restores the boundary and alarm level to the default.
The fwMailcfg menu displays.
1 : Show Mail Configuration Information
2 : Disable Email Alert
3 : Enable Email Alert
4 : Send Test Mail
5 : Set Recipient Mail Address for Email Alert
6 : Relay Host IP Configuration
7 : Quit
Select an item => : (1..7) [7]
The Config Show menu displays.
Config Show Menu
____________________________
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : End-to-End Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Resource class
12 : FRU class
13 : Quit
Select an item => : (1..13) [13]
Setting Fabric Watch custom and default values
5
31