Nemo; Configure A Nemo Tunnel - Digi Connect IT 4 User Manual

Hide thumbs Also See for Connect IT 4:

Table of Contents

Virtual Private Networks (VPN)

3. To display details about a specific tunnel:

> show l2tpeth name /vpn/l2tpeth/test/session/test

test/session/test Tunnel Session Status

---------------------------------------

Peer Tunnel ID

Peer Session ID

Lifetime (Actual)

4. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

NEMO

Network Mobility (NEMO) is a mobile networking technology that provides access to one or more

Local Area Networks (LANs) on your device. NEMO creates a tunnel between the home agent on the

mobile private network and the Connect IT 4 device, isolating the connection from internet traffic and

advertising the IP subnets of the LANs for remote access and device management.

Dynamic Mobile Network Routing (DMNR) is the implementation of NEMO for Verizon Wireless Private

Networks. DMNR support requires the use of Verizon SIM cards that have DMNR enabled.

Configuring an NEMO tunnel with a remote device involves configuring the following items:

Required configuration items

Enable the NEMO tunnel.

The NEMO tunnel is enabled by default.

The IP address of the NEMO virtual network interface.

Digi Connect IT® 4 User Guide

: 10.10.10.1

: 10.10.10.1 === 4.3.2.1

: le_test_test