Table of Contents
Advertisement
Virtual Private Networks (VPN)
Device
RX Packets
RX Bytes
TX Packets
TX Byptes
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
NEMO
Network Mobility (NEMO) is a mobile networking technology that provides access to one or more
Local Area Networks (LANs) on your device. NEMO creates a tunnel between the home agent on the
mobile private network and the IX30 device, isolating the connection from internet traffic and
advertising the IP subnets of the LANs for remote access and device management.
Dynamic Mobile Network Routing (DMNR) is the implementation of NEMO for Verizon Wireless Private
Networks. DMNR support requires the use of Verizon SIM cards that have DMNR enabled.
Configure a NEMO tunnel
Configuring an NEMO tunnel with a remote device involves configuring the following items:
Required configuration items
Enable the NEMO tunnel.
n
The NEMO tunnel is enabled by default.
The IP address of the NEMO virtual network interface.
n
The firewall zone of the NEMO tunnel.
n
The IP address of the NEMO home agent server. This is provided by your cellular carrier.
n
The home agent's authentication key. This is provided by your cellular carrier.
n
Home agent registration lifetime. This is provided by your cellular carrier.
n
The local network interfaces that will be advertised on NEMO.
n
IX30 User Guide
: le_test_test
: 2,102
: 462
: 2,787
: 3,120
NEMO
473
Advertisement
Table of Contents
