Connectors And Cables For Line And Dc Link Cabling - Siemens SINAMICS S210 Operating Instructions Manual

Ordering data
13.4 Accessories
13.4.2

Connectors and cables for line and DC link cabling

The following packages are available for the connectors
● 6SL3260-2DC10-0AA0: Connector package for line cabling
● 6SL3260-2DC00-0AA0: Connector package for line cabling and DC link coupling
Contents
● Connector for the line cabling
● Connector for the DC link coupling
● End caps
● Description/data sheet
The connectors are designed so that they cannot be accidentally interchanged.
X1: Connector for the line cabling
X3: Connector for the DC link coupling
End cap for line cabling and DC link coupling
340
Pin Pin assignment
L1 Phase L1 line system
L2 Phase L2 line system
L3 Phase L3 line system
Pin Pin assignment
DCP DC link, positive
-- not assigned
DCN DC link, negative
6SL3260-2DC10-0AA0: 6SL3260-2DC00-0AA0:
1
-
1
1
Explanation
The terminals are Torx screw terminals.
Permissible conductor cross-sections
● 16 mm
2
● AWG: 6
Tightening torque: 3 Nm
Explanation
The terminals are Torx screw terminals.
Permissible conductor cross-sections
● 16 mm
2
● AWG: 6
Tightening torque: 3 Nm
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
1
1
2
1