Setting The Communication Interfaces; Setting Up The Ethernet Interface - Siemens SINAMICS S120 Getting Started

Creating a drive object

5.2 Setting the communication interfaces

5.2 Setting the communication interfaces
5.2.1

Setting up the Ethernet interface

For the commissioning, the programming device (PG/PC) can be connected to the Control
Unit via an Ethernet interface. However, the communications interface of the programming
device must first be set up.
Note
The following procedure is based on the Windows XP operating system. With other
operating systems (such as Windows 7), operation may differ slightly.
Communication interface of the programming device
1. In the programming device (PG/PC) call up the control panel via the menu items "Start >
2. In the control panel, double-click on the "Network Connections" symbol and then double-
3. Select "Internet Protocol (TCP/IP)", and click the "Properties" button.
4. Activate the option "Use the following IP address."
22
Settings > Control Panel".
click on the relevant network card.
Getting Started, 01/2013, 6SL3097-4AG00-0BP2
Getting Started