Connection Cables Between The Motor And The Converter; Occ Motion-Connect Cable With Speed-Connect Connector - Siemens SINAMICS S210 Operating Instructions Manual

11.3

Connection cables between the motor and the converter

OCC MOTION-CONNECT cables can only be ordered as prefabricated cables.

OCC MOTION-CONNECT cable with SPEED-CONNECT connector

Designation and use
Motor connection cable OCC
MC 500 for predominantly fixed in‐
stallation
Motor connection cable OCC
MC 800PLUS for use in cable carrier
Extension cable OCC MC 500 for
predominantly fixed installation
Extension cable OCC MC 800PLUS
for use in cable carriers
The last 4 positions (☐☐☐☐) define the cable length corresponding to the length code
1)
Determining the article number of a prefabricated OCC MOTION-CONNECT cable
Figure 11-1
Procedure
1. Determine the required cable length l **. Consider having cable in reserve for strain-free
routing.
2. Determine the length code for the required length l ** corresponding to the following
overview. The stretched lengths (*) are added automatically for the prefabricated cables.
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA
11.3 Connection cables between the motor and the converter
Cable type
Lengths of an OCC MOTION-CONNECT cable
For connection Connector
to motor size
1FK2☐02 M12
1FK2☐03
1FK2☐04 M17
1FK2☐02 M12
1FK2☐03
1FK2☐04 M17
1FK2☐02 M12
1FK2☐03
1FK2☐04 M17
1FK2☐02 M12
1FK2☐03
1FK2☐04 M17
Ordering data
Article number
1)
6FX5002-8QN04-☐☐☐☐
6FX5002-8QN08-☐☐☐☐
6FX8002-8QN04-☐☐☐☐
6FX8002-8QN08-☐☐☐☐
6FX5002-8QE04-☐☐☐☐
6FX5002-8QE08-☐☐☐☐
6FX8002-8QE04-☐☐☐☐
6FX8002-8QE08-☐☐☐☐
217