Adding A Node To The Project - Datalogic AMT58 Series Manual

INSTALLING THE ENCODER UNDER TIA PORTAL ENVIRONMENT
Figure 3. Scrolling through the Profinet families and categories

Adding a node to the project

Now we need to install the module of the desired model.
In the right pane open the Hardware catalog task card to display the field devices inte-
grated into TIA Portal via the Profinet file (GSDML file); select the Datalogic product
family directory; drag the required module to the Network view and drop it next to the
PLC module. Then assign the module to the network.
Figure 4. Adding a node to the project
21
INSTRUCTION MANUAL