Chapter 3. Mechanical Installation; Solid Shaft Encoders; Customary Installation - Datalogic AMT58 Series Manual

Absolute encoders

Hide thumbs Also See for AMT58 Series:

Table of Contents

MECHANICAL INSTALLATION

Installation and maintenance operations must be carried out by qualified

personnel only, with power supply disconnected. Shaft and mechanical

components must be in stop.

For any information on the mechanical data and the electrical characteris-

tics of the encoder, please refer to the technical catalogue.

Mount the flexible coupling 1 on the encoder shaft;

fix the encoder to the flange 2 (or to the mounting bell) by means of the screws 3;

secure the flange 2 to the support (or the mounting bell to the motor);

mount the flexible coupling 1 on the motor shaft;

make sure the alignment tolerances of the flexible coupling 1 are respected.

Chapters

Table of Contents