Mechanical Safety - Datalogic AMT58 Series Manual

SAFETY SUMMARY
- The best solution to minimize the interference must be carried out by the user.

MECHANICAL SAFETY

•
•
•
•
•
•
•
•
2
AMT58...PN
Provide the ground connection as close as possible to the encoder. We suggest
using the ground point provided in the cap, use one TCEI M3 x 6 cylindrical head
screw with two tooth lock washers.
Install the device following strictly the information in the section 3 "Mechanical
installation";
mechanical installation has to be carried out with stationary mechanical parts;
do not disassemble the unit;
do not tool the unit or its shaft;
delicate electronic equipment: handle with care; do not subject the device and
the shaft to knocks or shocks;
respect the environmental characteristics of the product;
unit with solid shaft: in order to guarantee maximum reliability over time of
mechanical parts, we recommend a flexible coupling to be installed to connect the
encoder and user's shaft; make sure the misalignment tolerances of the flexible
coupling are respected;
unit with hollow shaft: the encoder can be mounted directly on a shaft whose
diameter has to respect the technical characteristics specified in the purchase
order and clamped by means of the collar and, when requested, the anti-rotation
pin.