Hollow Shaft Encoders; Amt-58-H15 - Datalogic AMT58 Series Manual

MECHANICAL INSTALLATION

HOLLOW SHAFT ENCODERS

AMT-58-H15

•
•
•
A - min. 8 mm, max. 18 mm
6
AMT58...PN
Mount the encoder on the motor shaft using the reducing sleeve 8 (if supplied).
Avoid forcing the encoder shaft;
fasten the fixing plate 4 to the rear of the motor using two M3 cylindrical head
screws 5;
fix the collar 3 to the encoder shaft (apply threadlocker to screw 3).