Configuring The Encoder With Siemens Tia Portal V15; About Tia Portal; Project Overview - Datalogic AMT58 Series Manual

•
NOTE
CONFIGURING THE ENCODER WITH SIEMENS TIA PORTAL
V15
NOTE

About TIA Portal

TIA Portal stands for Totally Integrated Automation Portal. It is an integrated engineer-
ing framework for controllers, HMI and drives. It integrates several SIMATIC products
into a single software in order to increase productivity and efficiency.
TIA portal can be used to configure both the PLC and the visualization in a homoge-
neous system. Data is saved in a single project. Tools for programming (STEP 7) and dis-
playing (WinCC) are not distinct programs, but editors of a system that has access to and
uses a common database. One single user interface is used to enter all functions used
for displaying and programming.

Project overview

1. Title bar: the name of the project is displayed in the title bar.
2. Menu bar: the menu bar contains all the commands that you require for your
the Set/shift of home position executed bit 12 in the G1_ZSW status word is set
back to 0, see "
Request set/shift of home position" on page 58
.
on page 86
It is possible to set and activate the preset value also by entering the web
server via browser (see " Integrated Web Server" on page 90 ): in the Set
Encoder Preset page (see " Setting and activating the preset" on page 96 ),
the operator can enter the desired Preset value and activate it.
If the encoder is used as a TO Technology Object, please refer to " TO Tech-
nology Objects" on page 34 .
work.

CONFIGURING THE ENCODER WITH SIEMENS TIA PORTAL V15

; see "
Preset diagram"
15
INSTRUCTION MANUAL