Setting The Device Name And The Ip Address - Datalogic AMT58 Series Manual

GETTING STARTED

Setting the device name and the IP address

As stated, to completely establish the connection, you have to assign the IP address and
the Profinet device name to the Slave device. To do so, enter the Device view working
area, select the device you need to configure in the drop-down box on the top left of
the graphic area, right-click on the image of the module and select the Properties com-
mand from the shortcut menu (or the Assign device name command as an alternative).
Figure 8. Setting the device name and IP address
In the Properties inspector window, General tab, you can now use the Ethernet
addresses menu option to set the Ethernet address (IP address, subnet mask, ...) and
assign the Profinet name of the Device.
Figure 9. Setting the device name and IP address
26
AMT58...PN