Datalogic AMT58 Series Manual page 280

INTEGRATED WEB SERVER
9. now you must launch the SW_ETH_REVX_Y.EXE executable file provided by Data-
10. launch the SW_ETH_REVX_Y.EXE executable file. The following page will appear:
11. type the IP address of the encoder in the Remote IP Address box;
12. press the FILE command and then the OPEN command in the menu bar; once you
13. some properties of the selected file are shown next to the relevant labels in the
CAUTION
14. press the Send File button to start the firmware upgrade process;
100
AMT58...PN
logic to continue with the procedure; X and Y indicate the version of the firmware
upgrading program: REV1_0 is the version 1.0;
press the OPEN command the OPEN dialog box appears on the screen: open the
folder where the firmware upgrading .BIN file released by Datalogic is located,
select the file and confirm. Hx in the file name shows the hardware version of the
PCB; Sx shows the software version of the firmware upgrading file.
page: File Name, File Dimension (byte), File Date - hour. Please check the file
properties and ascertain that you are installing the correct upgrade file;
Before installation always ascertain that the firmware program is compati-
ble with the hardware and software of the device.
Never turn the power supply off during the flash upgrade operation.