Datalogic AMT58 Series Manual page 279

2. as soon as you press the Upgrade Firmware command a warning message (Are
you sure you want to update the flash?) appears on the screen: it warns the oper-
ator about the awkwardness of the operation, thus he is required to confirm the
procedure before continuing;
3. press the OK button to proceed, otherwise press the EXIT button to abort the pro-
cedure. The Firmware upgrade canceled! message will appear on the screen.
Press the OK button to move back to the Web server Home page;
4. if you confirm the procedure, the Firmware Upgrade page will appear on the
screen: the operator is requested to submit a password before starting the firm-
ware upgrade procedure;
Figure 8. Firmware Upgrade page
5. in the Password text box type the password 0850 and then press the Send
Request button;
6. if the password you typed is wrong, the following warning message will appear on
the screen: THE PASSWORD INSERTED IS INCORRECT. PLEASE
retype the correct password and confirm;
7. if the password you typed is correct, the following message will appear on the
screen: THE PASSWORD INSERTED IS CORRECT. THE WEB SERVER OF THE
ENCODER IS STOPPED. NOW LAUNCH THE PROGRAM SW_ETH_REVX_Y.EXE;
8. the encoder is now ready to accept the firmware program: the web server is
stopped and the communication with the encoder through the web browser is
interrupted; if you need to exit the procedure and restore the communication you
must switch the encoder off and then on again;
FIRMWARE UPGRADE
RETRY!. Please
99
INSTRUCTION MANUAL