Encoder Position And Speed - Datalogic AMT58 Series Manual

INTEGRATED WEB SERVER
Press on the Datalogic logo to enter Datalogic web site (www.datalogic.com).
Press the Documentation command to enter the Profinet encoder technical documen-
tation page available on Datalogic web site where specific technical information and
documentation concerning the Profinet encoder can be found.
Furthermore, some commands are available in the left navigation bar. All the pages
except the Firmware upgrade page are freely accessible through the commands in the
bar. The Firmware upgrade page requires a password.
These commands allow to enter specific pages where information and diagnostics on
the connected encoder as well as useful functions can be achieved.
They are described in the following sections.

ENCODER POSITION AND SPEED

Press the Encoder Position-Speed command in the left navigation bar of the Web server
Home page to enter the page where the current encoder position and the current
encoder speed are displayed.
Figure 3. Encoder position & speed range
The current encoder position is expressed in counts. For any information refer to "
IST1" on page 52
The current speed is expressed according to the setting next the Velocity measuring unit
parameter (by default it is expressed in counts per second). For any information refer to
"
NIST_B" on page 60
NOTE
Press the Homepage command to move back to the Web server Home page.
92
AMT58...PN
.
.
The current encoder position and speed values are real-time processed and
continuously updated (every 200 ms on the screen).
G1_X-