Chapter 9. Encoder Parameters; User Parameter Data - Datalogic AMT58 Series Manual

CHAPTER 9
ENCODER PARAMETERS

USER PARAMETER DATA

User parameter data listed in the table below is sent to the encoder in the start-up
phase.
PARAMETER
Type of encoder
Code sequence
Class 4 functionality
G1_XIST1 Preset control
Scaling function control
Alarm channel control
Compatibility mode
Measuring unis /
Revolution
Total measuring range
Maximum tolerated fail-
ures of Master Sign-Of-
Life
Velocity measuring unit
62
AMT58...PN
DATA
INDEX
TYPE
516 BitArea
517 Bit
518 Bit
519 Bit
520 Bit
521 Bit
522 Bit
523 UnSigned32
524 UnSigned32
525 UnSigned8
526 BitArea
DEFAULT
0: AMT58 multiturn 13/14
0 (CW)
1 (enabled)
0 (enabled)
0 (disabled)
0 (disabled)
1 (disabled = profile version
V4.1)
8.192
134.217.728
1
0 (Steps/s)
COMMENT
Only supported in
Compatibility Mode
Only supported in
Compatibility Mode