Datalogic AMT58 Series Manual page 111

AMT58x-EC EtherCAT®
 Install the device following strictly the information in the section 3
"Mechanical installation "
 mechanical installation has to be carried out with stationary
mechanical parts;
 do not disassemble the encoder;
 do not tool the encoder or its shaft;
 delicate electronic equipment: handle with care; do not subject
the device and the shaft to knocks or shocks;
 respect
the
manufacturer;
 unit with solid shaft: in order to guarantee maximum reliability
over time of mechanical parts, we recommend a flexible coupling
to be installed to connect the encoder and user's shaft; make sure
the misalignment tolerances of the flexible coupling are
respected;
 unit with hollow shaft: the encoder can be mounted directly on a
shaft whose diameter has to respect the technical characteristics
specified in the purchase order and clamped by means of the
collar and, when requested, the anti-rotation pin.
2
Mechanical safety
environmental characteristics declared by