Datalogic AMT58 Series Manual page 74

AMT58x-PB Profibus®
5.1.3 Encoder configuration parameters
To access the parameters configuration window, first enter the
STEP7 HW Config main window and select the AMT58 item just
installed (AMT58 Class 2 in the example) available in the variables
table in the bottom left; then right-click the item and press the Object
Properties... command in the shortcut menu.
The Properties - DP slave window will appear. In the Parameter
Assignment page all configuration data parameters available for the
device are listed.
For a comprehensive description of the parameters and how to set
them properly refer to the specific explanation in section "6.4
DDLM_Set_Prm" on page 31.
Class 1 example
17