Diagnostics - Datalogic AMT58 Series Manual

GETTING STARTED

Diagnostics

Configuration of the diagnostics is integrated in the system in a user-friendly way and
activated with just one click. When new hardware components are introduced, the diag-
nostic information is updated automatically via the engineering system (HWCN). System
diagnostics outputs all relevant information on existing errors in the system. This infor-
mation is packaged automatically in messages containing the following elements:
•
•
•
To access the diagnostics function please proceed as follows.
1. Right-click on the module to process.
2. Select the Online & diagnostics command from the shortcut menu.
3. If there is no online connection established, click the Connect online button in the
4. The diagnostic status of the module will be displayed in the Diagnostic status
The following status information is displayed in the Diagnostic status area:
•
•
The scope of the displayed information depends on the selected module.
30
AMT58...PN
Module
Message text
Message status
Diagnostics entry.
group in the Diagnostics folder in the Online and diagnostics view of the module
to be diagnosed.
Status of the module as viewed by the CPU, for example:
- Module available and OK.
- Module defective.
- If the module experiences a fault and you have enabled the diagnostic error
interrupt during configuration, the "Module defective" status is displayed.
- Module configured, but not available.
Example: Diagnostics data is not available because the current online configura-
tion differs from the offline configuration.
Detected differences between the configured and the inserted module. Provided
it can be ascertained, the article number will be displayed for the set and actual
type.