Datalogic AMT58 Series Manual page 376

AMT58x-DN DeviceNET®
01-01-01 Vendor-ID
[UINT, ro]
Identification of each vendor by number.
Default = 0299h
01-01-02 Device type
[UINT, ro]
Default = 00h: general type.
01-01-03 Product code
[UINT, ro]
Identification of a particular product of an individual vendor.
01-01-04 Revision
[UINT, ro]
Hardware and software revisions, the Identity Object represents:
LSByte
major revision
01-01-05 Status
[WORD, ro]
This attribute represents the current status of the device. Its value
changes as the state of the device changes. Bit definitions are as
follows:
Bit(s) Called
0 Owned
1 Reserved
2 Configured
3 Reserved
36
MSByte
minor revision
Definition
TRUE indicates the device (or an
object within the device) has an
owner. Within the
paradigm the setting of this bit means
that the Predefined
Connection Set has been allocated to
a Master. Outside the Master/Slave
paradigm the meaning of this bit is
TBD.
Reserved, shall be 0
TRUE indicates the application of the
device has been configured to do
something different than the "out–of–
box" default. This shall not include
configuration of the communications.
Reserved, shall be 0
Master/Slave
Master/Slave