Setting And Activating The Preset - Datalogic AMT58 Series Manual

INTEGRATED WEB SERVER

SETTING AND ACTIVATING THE PRESET

Press the Set Preset Value command in the left navigation bar of the Web server Home
page to enter the Set Encoder Preset page and set/activate a Preset value. If you need to
set the preset occasionally, we suggest using the web server. For complete information
on the preset function please refer to the G1_XIST1_PRESET_VALUE signal on page 80.
To set and execute the preset via web server proceed as follows:
•
•
•
•
•
Figure 6. Set Encoder Preset page
•
96
AMT58...PN
press the Set preset command in the left navigation bar of the Web server Home
page and enter the Set Encoder Preset page;
as soon as you press the Set Preset Value command a warning message (Are you
sure you want to change Preset Value?) appears on the screen: it warns the oper-
ator about the awkwardness of the operation, thus he is required to confirm the
procedure before continuing;
press the OK button to proceed;
otherwise press the EXIT button to abort the procedure. The Set Preset cancelled!
message will appear on the screen. Press the OK button to move back to the Web
server Home page;
if you confirm the procedure, the Set Encoder Preset page will appear on the
screen;
the Preset value that is currently set in the encoder (see "
SET_VALUE" on page 54
) will be displayed in the READ box;
G1_XIST1_PRE-