Datalogic AMT58 Series Manual page 277

• to change the Preset enter a suitable value in the WRITE box and then press the
Set Preset Value button to confirm. The value has to be set in decimal notation.
The preset value is set and activated at the same time.
Figure 7. Setting the preset value
The preset value is set and activated for the position of the encoder in the
moment when the preset value is transmitted. It is activated as soon as the
value is confirmed by pressing the Set Preset Value button. We suggest
CAUTION
activating the preset value when the encoder is in stop.
At each confirmation of the set parameters, a message will appear under
the buttons (see the
operation has been accomplished properly or an error occurred (for exam-
NOTE
ple Command was set correctly
if something went wrong).
Press the Homepage command to move back to the Web server Home page.
SETTING AND ACTIVATING THE PRESET
No Command sent message). It informs whether the
if everything went well; or Command Error!
97
INSTRUCTION MANUAL