Adding A Node To The Project - Datalogic DeviceNet AMT58 Series Instruction Manual

AMT58x-DN DeviceNET®
Press the Browse... button to browse through the folders and select
the .eds file to be installed:
CD drive:\ROTACOD\DeviceNet\ AMT58-xxx-16x14-FBUS-DN if the
file is in the enclosed CD or a different path; finally press the Next >
button.
Then, follow the remaining steps to complete the EDS wizard.

5.2 Adding a node to the project

In the Hardware pane of the RSNetworx window, open the directory
tree and select \Generic Device; drag the "AMT58" module to the
Graph pane on the right.
14
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com