Closing An Online Connection - Datalogic AMT58 Series Manual

•
Figure 11. Online connection established
After the online connection has been established successfully, the user interface
changes (see the Figure above).
1. The title bar of the active window gets an orange background as soon as at least
2. Now the title bars of inactive windows for the relevant station have an orange line
3. An orange, pulsing bar appears at the right-hand edge of the status bar. If the con-
4. Operating mode symbols or diagnostics symbols for the stations connected online
5. The Diagnostics > Device information area is brought to the foreground in the

Closing an online connection

To close the existing online connection, follow these steps.
1. Select the device for which you want to disconnect the online connection in the
2. Select the Go offline command in the Online menu bar. The online connection is
Select the device in the Compatible devices in target subnet table and confirm the
selection with Go online. The online connection to the selected target device is
established.
one of the devices currently displayed in the editor has been successfully con-
nected online. If one or more devices are unavailable, a symbol for a broken con-
nection appears in the title bar of the editor.
below them.
nection has been established but it is not working properly, an icon for an inter-
rupted connection is displayed instead of the bar. You will find more information
on the error in Diagnostics in the Inspector window.
and their underlying objects are shown in the Project Tree. A comparison of the
online and offline status is also made automatically. Differences between online
and offline objects are also displayed in the form of symbols.
Inspector window.
Project Tree.
disconnected.
INSTALLING THE ENCODER UNDER TIA PORTAL ENVIRONMENT
29
INSTRUCTION MANUAL