Mounting Instructions; Solid Shaft Encoders; Customary Installation; Fissaggio Con Graffe (Codice St-58-Kit) - Datalogic DeviceNet AMT58 Series Instruction Manual

AMT58x-DN DeviceNET®
3.

Mounting instructions

WARNING
Installation has to be carried out by qualified personnel only, with
power supply disconnected and mechanical parts compulsorily in
stop.

3.1 Solid shaft encoders

 Mount the flexible coupling 1 on the encoder shaft;
 fix the encoder to the flange 2 (or to the mounting bell) by means
of screws 3;
 secure the flange 2 to the support (or the mounting bell to the
motor);
 mount the flexible coupling 1 on the motor shaft;
 make sure the misalignment tolerances of the flexible coupling 1
are respected.

3.1.1 Customary installation

3.1.2 Fissaggio con graffe (codice ST-58-KIT)

4
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
a [mm] b [mm] c [mm] d [mm]
AMT58 36 H7
a [mm] b [mm] c [mm] d [mm]
AMT58 36 H7
48 - -
- 67 -