Mounting Instructions; Solid Shaft Encoders; Customary Installation; Fissaggio Con Graffe (Codice St-58-Kit) - Datalogic AMT58 16x14 PB Series Instruction Manual

AMT58x-PB Profibus®

3. Mounting instructions

WARNING
Installation has to be carried out by qualified personnel only, with
power supply disconnected and mechanical parts compulsorily in
stop.

3.1 Solid shaft encoders

 Mount the flexible coupling 1 on the encoder shaft;
 fix the encoder to the flange 2 (or to the mounting bell) by means
of screws 3;
 secure the flange 2 to the support (or the mounting bell to the
motor);
 mount the flexible coupling 1 on the motor shaft;
 make sure the misalignment tolerances of the flexible coupling 1
are respected.

3.1.1 Customary installation

AMT58

3.1.2 Fissaggio con graffe (codice ST-58-KIT)

AMT58
4
a [mm] b [mm] c [mm] d [mm]
36 H7 48 -
a [mm] b [mm] c [mm] d [mm]
36 H7 - 67
-
-