Nortel DMS-100 Manual page 97

2-50 System level recovery procedures
Recovering a composite clock
Recovering a composite clock
At the MAP terminal
1
2
3
4
297-8021-545 Standard 14.02 May 2001
(continued)
CAUTION
Possible equipment damage or service interruption
Do not attempt this procedure before contacting your next
level of support.
DANGER
Possible service interruption
Do not attempt to manually busy the high-speed link
interface unit (HLIU), or use RTS to return the HLIU to
service.
Access LOGUTIL at the CI level of the MAP display by typing
>LOGUTIL
and pressing the Enter key.
Determine if log PM181 was generated by typing
>OPEN PM181
and pressing the Enter key.
Note: The PM181 log indicates the loss of a composite clock.
If a PM181 log
was generated
was not generated
Find out more information about the last five PM181 logs generated by typing
>BACK 5
and pressing the Enter key.
Post the LIM indicated in log PM181 by typing
>MAPCI;MTC;PM POST
and pressing the Enter key.
where
lim_no
is the number of the LIM indicated in log PM181
Do
step 3
step 20
LIM lim_no