Nortel DMS-100 Manual page 191

3-24 Node level recovery procedures
Recovering link peripheral processors
38
39
40
41
42
297-8021-545 Standard 14.02 May 2001
and press the Enter key.
If the response is
Link link_no:Traffic is
running on that link
Please
("YES","Y","NO",
"N"):
anything else including additional
messages with above response
To confirm the command, type
>YES
and press the Enter key.
To load the posted LIU7, type
>LOADPM
and press the Enter key.
If the LOADPM command
passed
failed
To return the LIU7 to service, type
>RTS
and press the Enter key.
If the RTS command
passed, but not all LIU7s in the
posted set are in service
passed and all LIU7s in the post-
ed set are in service
failed
To display the next LIU7 in the posted set, type
>NEXT
and press the Enter key.
Go to step 39.
To post the system-busy HLIUs that failed to recover, type
>POST HLIU liu_nos
(continued)
Do
step 38
confirm
or
step 85
Do
step 40
step 85
Do
step 41
step 18
step 85