Nortel DMS-100 Manual page 174

Recovering the enhanced network
File information for file S00DENET:
(Note: 1 BLOCK = 512 BYTES )
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CREATE MODIFY
DATE DATE
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
92/08/24 92/08/20
92/08/24 92/08/24
92/08/30 92/08/25
92/08/30 92/08/26
92/08/30 92/08/30
Note: In the preceding example, the FILE ORG, FILE CODE, REC TYPE,
and FILE STATUS columns of the MAP display do not appear. These
columns do not appear because of the small amount of space.
19 Determine if the latest image file is present on the disk. You recorded the
latest image file in either step 2 or 5.
If the latest image file
is present
is not present
20 To access the disk utility level of the MAP display, type
>DISKUT
and press the Enter key.
21 To list the volumes on both SLMs, type
>LISTVOLS CM
and press the Enter key.
22 Record the SLM volume names.
23 To list the files in one of the SLM volumes, type
>LISTFL disk_volume_name
and press the Enter key.
where
disk_volume_name
is the name of the SLM disk (S00D or S01D) and
the name of an SLM volume (for example,
S00DENET)
Example of a MAP response:
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
NUM NUM MAX.
RECORD
BLKS REC LENGTH
49364 4682 1020
72190 6095 1020
69364 4682 1020
75310 7655 1020
99370 8890 1020
Do
step 35
step 27
3-7
(continued)
IN FILE
ITOC NAME
N ENET_0820
N ENET_0824
N ENET_0825
N ENET_0826
N ENET_0830