Nortel DMS-100 Manual page 74

19 To enter the user name, type
>user_name
and press the Enter key.
where
user_name
is the name of the user for the account
Example of a MAP response:
Enter Password
20 To enter the password, type
>password
and press the Enter key.
where
password
is the password for the account
Example of a MAP response:
SuperNode1 Logged in on 1993/03/11 at 20:37:17.
21 To access the MS Clock level of the MAP display, type
>MAPCI;MTC;MS;CLOCK
and press the Enter key.
22 To synchronize the clocks, type
>SYNC
and press the Enter key.
If the SYNC command
passed
failed
23 To access the CM level of the MAP display, type
>CM
and press the Enter key.
24 Determine if the CPUs are in sync.
Note: A dot symbol under the Sync header indicates that the CPUs are in
sync. The word No indicates that the CPUs are not in sync.
If the CPUs
are in sync
are not in sync
DMS-100 Family NA100 Recovery Procedures LET0015 and up
System level recovery procedures
Performing a cold restart
Do
step 23
step 30
Do
step 31
step 25
2-27
(continued)