Restoring The Cm To Duplex Operation In Supernode - Nortel DMS-100 Manual

Application
Use this procedure to restore the computing module (CM) to normal duplex
operation. Perform this procedure after you power down one central
processing unit (CPU) to conserve emergency backup power.
You must follow the procedure Emergency power conservation—Shutdown in
this document to remove equipment from service. Equipment is in normal
in-service operation before you need to perform the procedure for emergency
power conservation.
Action
This procedure contains a flowchart and a list of steps. Use the flowchart to
review the procedure. Follow the steps to perform the procedure.
Emergency power conservation recovery procedures 5-7

Restoring the CM to duplex operation in SuperNode

DMS-100 Family NA100 Recovery Procedures LET0015 and up
Emergency power conservation