Nortel DMS-100 Manual page 289

4-82 Recovery procedures for individual devices and services
Recovering CCS7 linksets
21
22
23
24
25
297-8021-545 Standard 14.02 May 2001
(continued)
If the RTS command
failed
To reset the HLIU, type
>PMRESET
and press the Enter key.
If the PMRESET command
passed
failed
To load the HLIU, type
>LOADPM
and press the Enter key.
If the LOADPM command
passed
failed
To force the HLIU to return to service, type
>RTS FORCE
and press the Enter key.
If the RTS command
passed
failed
To post the HSLR, type
>POST HSLR liu_no
and press the Enter key.
where
liu_no or mliu_no
is the number of the HSLR (0 to 511)
Determine the state of posted HSLR.
If the state of the HSLR is
InSv
Offl
Do
step 21
Do
step 23
step 22
Do
step 23
step 44
Do
step 24
step 44
Do
step 31
step 26